Qeed USA Blog

Common Questions and Answers

Do you have a Loop Powered Current transducer?

Yes, the QI-50-I is a loop-powered current transducer and operates on a two-wire 4-20mA loop power supply.

I am looking for a current transducer that can accept AC or DC current input.

The QI-50-I can work on both DC and AC circuits.

I have a solar power system and I want to measure the current in both directions?

The QI-50-I can be configured for bidirectional current measurement.

I am looking for a Loop Powered current transmitter that can measure a range of 0-25 Amps or 0-50 Amps.

The QI-50-I can be easily configured using DIP switches for either 0-25 Amps or 0-50 Amps, allowing for convenient adjustments without the need for additional tools.

I am looking for a Loop Powered current transmitter that can measure a range of 0-150 Amps or 0-300 Amps.

The QI-300-I can be easily configured using DIP switches for either 0-150 Amps or 0-300 Amps, allowing for convenient adjustments without the need for additional tools.

I am looking for a current transmitter with a 12-bit resolution?

The QI-50-I transducer offers a resolution of 12 bits, ensuring accurate measurements with fine granularity.

I am looking for a Single Phase ModBus Power Meter which is DIN rail mounted?

The QI-Power-485 is a Hall effect power meter with a Modbus RTU output.

I am looking for a Single Phase ModBus Power Meter that can indicate Power, Current, Voltage, and display Maximum, Minimum, and Peak measurements.

The QI-Power-485 can store Power, Current, and Voltage readings in its register table.

I am looking for a Modbus Current Transducer. I want to measure the current and store it in a Modbus Register.

The QI-50-V-485 is a Hall effect current transducer that provides an RS485 Modbus output of the measured current.

I am looking for a Modbus Current Transducer that can read up to 300 Amps.

The QI-300-V-485 can measure current up to 300 Amps, whether DC or AC, and provide a Modbus output.